The modern workspace is no longer a static arrangement of desks and rigid grids. When architecture embraces fluid shapes and organic layouts, standard lighting grids become a constraint. Omniliner is a continuous linear system that follows the contours of your architecture: straight runs, flawless curves and seamless corners, with complete design freedom, technical precision and ecological responsibility.
X, T and L junctions and a 90° wall-to-ceiling transition break the traditional grid. Even more with curved sections of 45° or 90° that keeps the light with the same UGR values and uniformity as the straight runs.
Combine General Light, Low Glare (UGR<19), Task Light (UGR<19), uplight and spots in one continuous profile, with efficacies up to 170 lm/W. Tunable White 2700–5000K and CRI>90 follow the rhythm of the workday.
Multi-sensors, emergency lighting with 3-hour autonomy and a 48V spot track are built into the profile. No standalone units break up the ceiling plane.
The profile uses 100% recycled aluminium and up to 24% less material than our previous, similar profile systems. Interchangeable modules make upgrades and repairs easy.
Standard curved lighting often compromises on light quality, leaving dim spots or poor glare control. Omniliner is engineered differently: within the curve it keeps its exact UGR values and perfect uniformity, so the entire continuous profile performs the same.
Curved modules come in 45° and 90°, in three radii for General Light and a 90° R420 mm curve for Low Glare. Light-tight X, T, L and V90° junctions ensure a perfectly flush fit. There are no gaps and no light leaks, even at the most complex intersections.
SBL (sandblasted) diffusers provide soft and diffused lighting with enhanced visual comfort and aesthetic appeal, making them suitable for general lighting applications.
2780 - 4029 lm/m · up to 170lm/W
Prismatic optic for uniform illumination with minimal glare, ideal for screen-based work.
UGR<19 · 2433 – 3697 lm/m · up to 169 lm/W
63° reflector for precise, targeted light on individual workspaces, often combined with uplight.
UGR<19 · 2534 – 7283 lm · up to 162 lm/W
Batwing distribution for an even wash across the ceiling. It softens contrasts and makes the office feel calmer and more spacious.
1931 – 2776 lm/m · up to 168 lm/W
Integrated multi-sensors handle presence detection and daylight regulation and support BREEAM certification targets. Built-in emergency lighting with 3-hour autonomy (LiFePO4 batteries) keeps the ceiling free of standalone units.
With Tunable White (2700–5000K) and CRI>90, Omniliner follows the changing qualities of daylight through the workday, supporting well-being and concentration. Settings can be fine-tuned after installation.
A fully integrated, DALI-dimmable 48V track takes click-in spot modules. You can add or reposition them tool-free at any moment, without interrupting the continuous downlight line, so the lighting can follow evolving office layouts. Choose the SPY 39 (1000 lm) or SPY 66 (3000 lm), in matching or contrasting architectural finishes.
Sits flush into the ceiling for a fully integrated finish, with just a Small Trim (ST) and a clean line of light marking its place.
Disappears completely into the ceiling plane, with no visible frame or trim, just an uninterrupted line of light, as if it were always part of the architecture.
Mounts directly onto ceiling or wall for a fast, flexible install wherever recessing isn’t an option, without giving up the sleek Omniliner look.
Floats below the ceiling on cables or rods and casts light up and down in one clean line. Here the profile itself becomes part of the architecture.
Choose mounting, profile, optics and controls in five steps. Then export technical drawings, a bill of materials and a quotation request. Need a standard dimension? Ready-made lengths can be ordered directly.
Complex layouts stay straightforward on site. Precision click-connectors align each corner segment automatically, and profiles are joined with a single screw turn, light-tight and without spill light at the crossings. End caps snap in tool-free and are just 6 mm thick. For suspended constructions, the patented Suspension and Connection details (ST and Trimless) keep visible hardware to a minimum.
The profile is made from 100% recycled aluminium. Compared to our previous, similar profile systems, Omniliner uses up to 24% less aluminium (kg/m) without compromising structural integrity or functionality. Interchangeable modules allow easy upgrades and repairs, which extends the system’s useful life. Presence and daylight sensors make sure light is only used when and where it’s needed.
