Les ambiances lumineuses ne sont pas seulement destinées à l'intérieur, en combinant lumière et architecture, Frax transforme les espaces extérieurs en lieux nocturnes animés. Avec ses 7 effets lumineux et ses multiples possibilités d’installation, Frax a été conçu pour tous les aspects de l’architecture urbaine : toute forme, tout matériau ou toute composition. Que vous deviez éclairer des sculptures, des arbres ou des bâtiments, Frax garantit un éclairage efficace et de haute qualité.
PRÉCISION OPTIQUE Technologie LED Caset Frax repose sur la technologie LED Caset® de Delta Light, qui se caractérise par des lentilles collimatrices individuelles par LED, gage d’une diffusion nette de la lumière. Les lentilles individuelles créent une diffusion de lumière en plusieurs couches, focalisée dans un angle de faisceau net de 8 ° ou 14 °. D’autres angles de faisceau ou d’autres effets lumineux peuvent être obtenus en ajoutant des microlentilles à l’avant, pour ainsi façonner la lumière dans un angle de faisceau de 26 ° ou 47 °, ou créer un effet linéaire ou « lèche-mur ».
Bien-être visuel Frax se soucie non seulement de l'effet lumineux parfait, mais aussi du passant. Frax peut être associé à un accessoire Casquette (Snoot) ou Nid d’abeille pour améliorer le confort visuel. Les deux réduisent tout effet de lumière indésirable et l'éblouissement qui y est associé.
Conçu pour les environnements difficiles IP65 IK 06 grâce au verre de 5 mm d'épaisseur pour Frax S IK 08 grâce au verre de 8 mm d'épaisseur pour Frax M Composants résistants aux UV pour une durée de vie prolongée Protecteur thermique à l'intérieur pour éviter la surchauffe du luminaire D-Lock: verrou d'humidité conçu en interne pour empêcher l'humidité de pénétrer dans le luminaire
Installation simplifiée Outre les nombreuses possibilités optiques, Frax propose également une gamme d'options de montage différentes. De série, le luminaire est livré sur une base ronde mais on peut également opter pour l'installation sur une tige, une courroie ou un support simplifié. De cette façon, Frax peut facilement être transformé pour être planté dans le gazon, attaché autour d'un arbre, d'un poteau ou fixé dans toute autre surface. Pour faciliter l'installation de plusieurs luminaires Frax, une échelle de degré est intégrée sur la charnière, parfaite pour une visée précise et un effet lumineux répétitif approprié.
Lumens: 448 lm - 2070 lm
Puissance: 7 W - 27 W
Plage de faisceau: 8° / 14° / 26° / 47°
Temperature de couleur: Blanc Halogène (+2700K) / Blanc Chaud (+3000K)
High performance exterior spotlight (IP65). Small size. Optional honeycomb, linear, and wallwash optics. Mounts to standard j-box. Integral driver.
Lumens: 448 lm - 740 lm
Puissance: 9 W
Plage de faisceau: 14° / 26° / 47°
Temperature de couleur: Blanc Halogène (+2700K) / Blanc Chaud (+3000K)
Fiche technique
Inspiration
University Cattolica of Milan in Cremona (IT)
The complex of the former Monastery of Santa Monica occupies a vast area of over 20,000 square meters in the south-west area of the historic center of Cremona.
Among the monasteries in the area it is the oldest.
In 1480, at the behest of Bianca Maria Visconti, the congregation of San Salvatore was reformed and the monastery named after Santa Monica became the largest and most important convent of female cloister in the city.
The iconographic map of Cremona, drawn up by Antonio Campi in 1583, represents the Monastery in its complete form.
The factory revolved around the main cloister, organized according to the usual arrangement of the conventual premises.
To the east, towards the city, the functions with greater relations with the outside world: the Parlatori, the Church and to the north the minor cloister which housed the hospital, the warehouses, the wash houses, the “tonseria” and the lodgings of settlers and workers . To the south and west, overlooking the alluvial area of the ancient route of the Po, the gardens and the so-called “rooms of the Abbess”.
Santa Monica, like many other monasteries, after the suppression of religious orders with Joseph II (1782/84), and then with the French domination, was converted into a barracks.
But it was the post-unification military interventions of the late 1800s that produced profound transformations.
In many environments the vaults were in fact demolished, replacing them with wooden floors and the church was lofted.
From the second post-war period the complex was gradually abandoned.
A project of such complexity required different interpretations and different visual angles: the urban scale, the new functions, the historical reconstruction, the restoration.
The first goal we set ourselves was to give back to the city a large strategic area, trying to open the “fence” that the historical functions and the long period of abandonment had stolen from the community.
This was possible thanks to a reinterpretation of the original functions which, even in a cloistered monastery, have a hierarchy of progressive confidentiality.
The project had to reconcile the historical and artistic value of the Monastery with a specialized function, often with a high technological content.
Our intent was to draw from this balance an opportunity for mutual enhancement between conservation needs and innovation.
The restoration was accompanied by an archaeological and stratigraphic investigation phase that allowed a careful reconstruction of the history of the monastery from its origins, and to rediscover a rich mural painting - in the church in the chapter house, in the refectory and in other smaller rooms - which testifies, together with the articulated geometry of the vaults, the wealth of the monastery.
The project was the opportunity for a stratigraphic reading of the different moments of transformation.
Significant from this point of view was the construction of the aula magna in the former church, which followed the classic scheme of monastic churches consisting of an external church, open to the city, and an internal church
with the nuns’ choir. It is the part of the monastery that has undergone the most violent changes. The demolition of the partition wall between the external and internal church, the plugging of the colonnade that separated the three naves and the inclusion of the mezzanine, have profoundly changed the perception of space. Without erasing the traces of the transformations, with the partial removal of the mezzanine and the demolition of the infill between the four columns in botticino, we have brought back to view the portion of the external church with the frescoes by De Longe and Natali restored.
The prolonged abandonment has given us a very degraded complex with large areas already in collapse, but also in this case we have tried not to erase the traces of this stage in the life of the 'factory', even if it is traumatic.
Emblematic in this sense in the south wing of the cloister is the choice of enhancing the traces of the collapse of the vaults by letting natural light penetrate the heart of the building, thanks to the gaps generated by the collapse
and without venturing into philologically questionable reconstructions.
Natural light plays a decisive role above all in defining the materiality of the surfaces - lime plasters, sagramature, dull, and exposed brick -, while artificial light, in addition to giving accent to the frescoes, defines the internal volumes and marks the hierarchy of the environments with a balance between direct and indirect lighting, always at the service of architecture.
Two elements above all characterize the intervention: The new metal inserts and the light.
The brown-colored steel of the stairs, “Polanceau” trusses, stays, braces and reverse trusses underlines the consolidation interventions and the access system, as distinctive elements of the new phase of the 'factory'.